InsulTech™ System Cut Sheet

insultech_1-2_high_wall_option

INSULTECH™ INSULATED FULL AND HALF-HIGH CONCRETE MASONRY SYSTEM

InsulTech™ ICMS is a complete thermally broken insulated masonry system which includes a full complement of masonry units and is produced by Oldcastle®. InsulTech o ers high thermal efficiency in an innovative design combining a pre-assembled structural masonry unit, molded High Performance Neopor® EPS insulation insert and thin veneer face. InsulTech provides design flexibility, installation efficiency and is available in both standard finishes as well as Trenwyth® colors and textures.

ACHIEVE MORE WITH A SINGLE BLOCK

InsulTech™ is a pre-assembled structural masonry unit, molded EPS insulation insert and thin veneer face all-in-one. This complete assembly not only improves overall energy efficiency, but reduces installation time — since one block does it all. It’s available in both standard finishes, as well as Trenwyth architectural block colors and textures.

• ENERGY EFFICIENCY InsulTech BASF Neopor® EPS molded insulation inserts combine with a CMU and thin veneer to provide a 16.2 R-Value at 75°F. Insultech system meets 2012 & 2015 IECC Energy codes from Zones 1 through 7.
• AESTHETICS A single block provides color and texture for both interior and exterior surfaces.
• MOISTURE MANAGEMENT Molded drainage channels within the EPS inserts, combined with compliant closed cell gasket material with drainage perforations, provide continuous insulation, air tightness and superior moisture management.
• ACOUSTICS Combined insulation and CMU provide increased acoustical comfort.

INSULTECH™ ICMS BLOCK UNITS

Consists of a pre-assembled structural masonry unit, molded EPS insulation insert and thin veneer face

FEATURES & BENEFITS

Complete insulated concrete masonry system with a full complement of masonry units

• Consists of a pre-assembled structural masonry unit, molded Neopor® EPS insulation insert and thin veneer face with finished sizes of 12 1/4″W x 4″H x 16″L Nom.
• Installed as a complete assembly to improve installation efficiency
• Insultech molded insert uses BASF High Performance Neopor EPS molded insulation inserts, giving the assembled unit an effective R-value of 16.2 at 75° F.
• Fully thermally broken units and system • Meets 2012 and 2015 IECC Energy codes from Zones 1 through 7
• Internal stainless steel metal anchors molded into the EPS inserts ensures safety connection to the back wall during windloading and Fire Integrity™ for fire safety
• Innovative design provides continuous insulation and air tightness formed by the EPS inserts in combination with compliant closed cell gasket material and production spray applied air barrier
• All InsulTech™ CMUs and Thin Veneer Faces are produced with RainBloc® Integral Water Repellant or other Oldcastle approved water repellant admixtures.
• Multitude of color and texture options for aesthetic needs